Nomad 883 Pro PSU Holder | 3D Model
This is a bracket to mount the power supply on the Nomad 883 (NOT Nomad 3!) to the back of the machine and keep it out of the way. This attaches via existing M3 fasteners. Fits the 24V 7.5A power bricks that shipped with Nomad Pro’s for the past few years. (Not sure about the Nomad 883 Classic’s….)
3D Printing Note: The side that goes against the Nomad should face downwards on your build plate, assuming your printer is okay with 70 degree overhangs.
For non-commercial use only. You may print or machine this file for your personal use. Fusion360 file included in case you want to tweak the dimensions.
If you want to support my work, you can check out some of the tools I use via affiliate link or make a donation to my tool fund here: Tools I Use
This is a bracket to mount the power supply on the Nomad 883 (NOT Nomad 3!) to the back of the machine and keep it out of the way. This attaches via existing M3 fasteners. Fits the 24V 7.5A power bricks that shipped with Nomad Pro’s for the past few years. (Not sure about the Nomad 883 Classic’s….)
3D Printing Note: The side that goes against the Nomad should face downwards on your build plate, assuming your printer is okay with 70 degree overhangs.
For non-commercial use only. You may print or machine this file for your personal use. Fusion360 file included in case you want to tweak the dimensions.
If you want to support my work, you can check out some of the tools I use via affiliate link or make a donation to my tool fund here: Tools I Use
This is a bracket to mount the power supply on the Nomad 883 (NOT Nomad 3!) to the back of the machine and keep it out of the way. This attaches via existing M3 fasteners. Fits the 24V 7.5A power bricks that shipped with Nomad Pro’s for the past few years. (Not sure about the Nomad 883 Classic’s….)
3D Printing Note: The side that goes against the Nomad should face downwards on your build plate, assuming your printer is okay with 70 degree overhangs.
For non-commercial use only. You may print or machine this file for your personal use. Fusion360 file included in case you want to tweak the dimensions.
If you want to support my work, you can check out some of the tools I use via affiliate link or make a donation to my tool fund here: Tools I Use